KRFM013 - Ford/Mazda T6/T7 (2012-Current) Load Bar Kit / Track & Feet - by Front Runner Consisting of: 1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner 1 x FASS013 - Foot Set / 60mm-70mm - by Front Runner 1 x LBSK014 - Roof Load Bar Pair 1255mm(W) - by Front Runner 1 x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L) - by Front Runner 1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 8kg (18lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 250mm (10")Length 1360mm (54")Height 110mm (4") Shipping Weight: Weight 9.3kg (20.5lbs) A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 50mm Feet, 2 60mm Feet, 2 1255mm Load Bars, 2 Ford Ranger 1200mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle. You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.These Load Bars are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet.Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.Made from stainless steel and a durable, weather resistant black powder-coated aluminum.Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.

LOAD BAR KIT / TRACK & FEET BY FRONT RUNNER SUITS FORD/MAZDA T6/T7 (2012-CURRENT)

Code: KRFM013

Add Your Review

LOAD BAR KIT / TRACK & FEET BY FRONT RUNNER SUITS FORD/MAZDA T6/T7 (2012-CURRENT)

$550.00

In Stock

Quantity

Add to Wishlist Add to Compare

Category: Roof Racks, Tub Racks & Accessories

1-4 DAYS DELIVERY
100% ORIGINAL AND QUALITY
24 MONTHS GUARANTEE

KRFM013 - Ford/Mazda T6/T7 (2012-Current) Load Bar Kit / Track & Feet - by Front Runner

Consisting of:

1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x LBSK014 - Roof Load Bar Pair 1255mm(W) - by Front Runner
1 x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner

Material used:

Black epoxy powder-coated T6 aluminium
High strength steel

Approximate Installed Weight 8kg (18lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.

If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.

If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.

Shipping Dimensions:

Width 250mm (10")
Length 1360mm (54")
Height 110mm (4")

Shipping Weight:

Weight 9.3kg (20.5lbs)

A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 50mm Feet, 2 60mm Feet, 2 1255mm Load Bars, 2 Ford Ranger 1200mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle.

You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.

These Load Bars are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet.

Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.

Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.

The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.

The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.

Made from stainless steel and a durable, weather resistant black powder-coated aluminum.

Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.

KRFM013 - Ford/Mazda T6/T7 (2012-Current) Load Bar Kit / Track & Feet - by Front Runner

Consisting of:

Material used:

Black epoxy powder-coated T6 aluminium
High strength steel

Approximate Installed Weight 8kg (18lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

Width 250mm (10")
Length 1360mm (54")
Height 110mm (4")

Shipping Weight:

Weight 9.3kg (20.5lbs)

The Diesel Doctor Australia is unable to provide an estimated time of delivery. If you will be unavailable to sign for the delivery at your home address, we recommend nominating a work or other suitable address where a member will be present during deliver hours (Approx. 8:30am-5:00pm). In the instance someone is unavailable to sign for your delivery, our carriers will leave a card and you will be required to contact our carrier directly to make alternative delivery arrangements.

Tracking information will be updated once the parcel is sent. If you have any enquiries regarding tracking information, please contact us via phone (03) 9041 2770 or email at thedieseldr@outlook.com.

Please inspect your parcel and its contents carefully on delivery. If you find any item missing or damaged, please contact us and we will provide immediate assistance.

The Current delivery window for normal sized parcels is 3 to 7 Business Days. However, postage delays may occur during the busy seasons. Postage charges may apply on various items that are oversized or for delivery outside the following metropolitan areas in all states of Australia.

If express delivery is required, please contact us.

We are happy to exchange any product purchased Online as long as the product is returned in its original condition (unopened and unmarked packaging), and is accompanied by proof of purchase in the form of a tax invoice/receipt and/or packing slip. Delivery charges are not refundable for incorrect choice, and products are to be returned to the store at the customer's own cost.

In order to process your exchange of goods, please be sure to include a note or email correspondence explaining the reason for the return, the item you wish to exchange it with, as well as your daytime contact telephone number so that our Customer Service Team are able to contact you to arrange delivery of the exchanged item (postage charges apply). We will replace any item that has arrived Damaged or is Missing from your order at no cost to you, any faults or missing items must be reported to us via eBay within 48 hours of your package being signed for.