A must-have for anyone who owns a Roof Top Tent, our Quick Release Tent Mount Kit allows you to mount and remove it in seconds without any tools. This makes it ideal for those puzzled about garage clearance or who’d prefer not to be driving around with their roof top tents during the workweek. The two lockable latches provide an off-road tough, rattle-free mounting system that is compatible with various soft- and hard-shell rooftop tents. Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or install a roof top tent. Simply release the tabs on the 2 latches and lift the tent away in seconds. No more wrenching in tight spaces during the ‘off-season’ or time-consuming weekday removal of a roof top tent. This strong and rattle-free mounting system is built off-road tough for use with Front Runner Racks. Compatible with the Roof Top Tent and other popular soft shell tent brands like TJM, ARB, Tepui, etc*. Compatible with hard shell tents such as Autohome/Maggionlina, and James Baroud*. Hard shell tent owners please read **IMPORTANT NOTE below. 2 low profile base brackets are bolted to a Front Runner Rack while 2 self-aligning bushes are secured to the tent base channels using the appropriate Tent Channel Set. Secures in place with 2 latches with safety catches. Can be locked using Rack Accessory Lock / Small combination cable lock. Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack. The brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available. No tent modification is required. Removed tents can be stored on the ground, raised slightly off the floor by the supplied steel bushes. Supplied with all required mounting hardware. Fitting instructions are included. James Baroud Quick Release Tent Channel Set or Autohome Quick Release Tent Channel Set may be required for other tent brands (sold separately). *Soft shell and hard shell tents may need additional Nut Plates, sold separately. Additional tent mount kits, Quick Release Tent Mount Kit / 4 Piece or Quick Release Tent Mount Kit / 6 Piece are available. **IMPORTANT NOTE: Hard shell tents need additional support. If you are using these brackets with hard shell tents, such as James Baroud or Autohome, and you are unable to position the tent to rest directly on the rack, or the edges of the rack side profiles, use – Hard Shell Tent Support Channels. Depending on the tent manufacturer, your hard shell tent warranty may be voided if your tent becomes damaged and you did not provide proper lateral support for the hard shell tent. Note: Extra Mounting Brackets may be required for some tent and rack combinations which require extra support.

Quick Release Tent Mount Kit / 2 Piece -BY FRONT RUNNER

Code: TBMK019

Add Your Review

Quick Release Tent Mount Kit / 2 Piece -BY FRONT RUNNER

$100.00

In Stock

Quantity

Add to Wishlist Add to Compare

Category: Roof Racks, Tub Racks & Accessories

1-4 DAYS DELIVERY
100% ORIGINAL AND QUALITY
24 MONTHS GUARANTEE

Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or install a roof top tent.
Simply release the tabs on the 2 latches and lift the tent away in seconds.
No more wrenching in tight spaces during the ‘off-season’ or time-consuming weekday removal of a roof top tent.
This strong and rattle-free mounting system is built off-road tough for use with Front Runner Racks.
Compatible with the Roof Top Tent and other popular soft shell tent brands like TJM, ARB, Tepui, etc*.
Compatible with hard shell tents such as Autohome/Maggionlina, and James Baroud*. Hard shell tent owners please read **IMPORTANT NOTE below.
2 low profile base brackets are bolted to a Front Runner Rack while 2 self-aligning bushes are secured to the tent base channels using the appropriate Tent Channel Set.
Secures in place with 2 latches with safety catches. Can be locked using Rack Accessory Lock / Small combination cable lock.
Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack.
The brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available.
No tent modification is required.
Removed tents can be stored on the ground, raised slightly off the floor by the supplied steel bushes.
Supplied with all required mounting hardware.
Fitting instructions are included.
James Baroud Quick Release Tent Channel Set or Autohome Quick Release Tent Channel Set may be required for other tent brands (sold separately).
*Soft shell and hard shell tents may need additional Nut Plates, sold separately.
Additional tent mount kits, Quick Release Tent Mount Kit / 4 Piece or Quick Release Tent Mount Kit / 6 Piece are available.

**IMPORTANT NOTE: Hard shell tents need additional support. If you are using these brackets with hard shell tents, such as James Baroud or Autohome, and you are unable to position the tent to rest directly on the rack, or the edges of the rack side profiles, use – Hard Shell Tent Support Channels. Depending on the tent manufacturer, your hard shell tent warranty may be voided if your tent becomes damaged and you did not provide proper lateral support for the hard shell tent.

Note: Extra Mounting Brackets may be required for some tent and rack combinations which require extra support.

Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or install a roof top tent.
Simply release the tabs on the 2 latches and lift the tent away in seconds.
No more wrenching in tight spaces during the ‘off-season’ or time-consuming weekday removal of a roof top tent.
This strong and rattle-free mounting system is built off-road tough for use with Front Runner Racks.
Compatible with the Roof Top Tent and other popular soft shell tent brands like TJM, ARB, Tepui, etc*.
Compatible with hard shell tents such as Autohome/Maggionlina, and James Baroud*. Hard shell tent owners please read **IMPORTANT NOTE below.
2 low profile base brackets are bolted to a Front Runner Rack while 2 self-aligning bushes are secured to the tent base channels using the appropriate Tent Channel Set.
Secures in place with 2 latches with safety catches. Can be locked using Rack Accessory Lock / Small combination cable lock.
Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack.
The brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available.
No tent modification is required.
Removed tents can be stored on the ground, raised slightly off the floor by the supplied steel bushes.
Supplied with all required mounting hardware.
Fitting instructions are included.
James Baroud Quick Release Tent Channel Set or Autohome Quick Release Tent Channel Set may be required for other tent brands (sold separately).
*Soft shell and hard shell tents may need additional Nut Plates, sold separately.
Additional tent mount kits, Quick Release Tent Mount Kit / 4 Piece or Quick Release Tent Mount Kit / 6 Piece are available.

Note: Extra Mounting Brackets may be required for some tent and rack combinations which require extra support.

The Diesel Doctor Australia is unable to provide an estimated time of delivery. If you will be unavailable to sign for the delivery at your home address, we recommend nominating a work or other suitable address where a member will be present during deliver hours (Approx. 8:30am-5:00pm). In the instance someone is unavailable to sign for your delivery, our carriers will leave a card and you will be required to contact our carrier directly to make alternative delivery arrangements.

Tracking information will be updated once the parcel is sent. If you have any enquiries regarding tracking information, please contact us via phone (03) 9041 2770 or email at thedieseldr@outlook.com.

Please inspect your parcel and its contents carefully on delivery. If you find any item missing or damaged, please contact us and we will provide immediate assistance.

The Current delivery window for normal sized parcels is 3 to 7 Business Days. However, postage delays may occur during the busy seasons. Postage charges may apply on various items that are oversized or for delivery outside the following metropolitan areas in all states of Australia.

If express delivery is required, please contact us.

We are happy to exchange any product purchased Online as long as the product is returned in its original condition (unopened and unmarked packaging), and is accompanied by proof of purchase in the form of a tax invoice/receipt and/or packing slip. Delivery charges are not refundable for incorrect choice, and products are to be returned to the store at the customer's own cost.

In order to process your exchange of goods, please be sure to include a note or email correspondence explaining the reason for the return, the item you wish to exchange it with, as well as your daytime contact telephone number so that our Customer Service Team are able to contact you to arrange delivery of the exchanged item (postage charges apply). We will replace any item that has arrived Damaged or is Missing from your order at no cost to you, any faults or missing items must be reported to us via eBay within 48 hours of your package being signed for.