HPD INTERCOOLER KIT TO SUIT NAVARA NP300 2.3
HPD INTERCOOLER KIT TO SUIT NAVARA NP300 2.3
HPD
High Performance Diesel are proud to introduce our new front mount intercooler upgrade for the D23 NP300 Navara twin turbo. After testing the factory intercooler setup on the NP300 it became quickly evident that the intercooler was under rated for the performance of the YS23DDTT motor.
We set out to build a non invasive, direct fit intercooler with a HUGE capacity and no cutting or drilling.
What we developed has resulted in a direct bolt on kit with no irreversible modifications at all needed.
HPD has developed a charge pipe adaptor with a dual seal to eliminate any leaking issues that have become a hallmark of the factory intercooler system.
The factory Nissan intercooler core size is 540x155x80mm, giving a surface area of 840cm², and a volume of 6700cc.Our upgrade intercooler measures 600x300x76mm, giving a massively improved surface area of 1800cm², and a simply HUGE volume of 13680cc.
That's an increase of over 200% in surface area cooling and charge air cooling volume!
NOTE: If your car is equipped with Forward Emergency Braking radar system, this may need to be relocated in order to install the intercooler kit. Please check compatibility with your vehicle.
THERE IS KNOWN FITMENT/CLEARANCE ISSUES TO SERIES 5 WARRIOR WITH IRONMAN BULLBAR
Hot pipe:
HPD also offer an optional replacement Hot pipe which eliminates the factory pipe commonly found to leak oil back on top of the turbocharger. We have designed a twin sealing coupling that outperforms OE and also eliminates the factory baffles. Hotpipe includes retaining clip.
*Please note - HPD Hot Pipe is not compatible with stock intercooler & piping*
Kit features:
Bar & Plate Core 600x300x76mmAlloy mandrel bent pipingBillet charge pipe adaptorQuality silicone hoses and load rated German made clampsLaser cut mounting bracketsHot side piping 57mmøCold side piping 57mmøNo cutting of radiator support for piping
HPD 4WD intercooler kits are designed to give amazing performance, reliability, consistent and sustainable power. By reducing inlet temperatures you will also reduce engine running temperatures.
The comprehensive kit has been manufactured with careful research and development. Each kit is vehicle specific with a heat exchanger, alloy mandrel bent piping, quality silicone hoses and fittings.
Our Intercooler Kits are easy to install with basic workshop tools and backed by the HPD team who can help you at any step of the way. With our dealer network Australia wide, you guys that don’t like to get your hands dirty can have your kit installed by a qualified technician. Our front mounted intercoolers don’t suffer from heat soak from high under bonnet temperatures like top mounted intercoolers or water to air intercoolers which at low speed - hard slogging can increase inlet temperatures.
HPD intercooler kits suit all the leading aftermarket turbo kits that don’t have an option for intercooling, allowing you to increase the performance, reliability and fuel efficiency of your 4WD.
![HPD INTERCOOLER KIT TO SUIT NAVARA NP300 2.3]()
![HPD INTERCOOLER KIT TO SUIT NAVARA NP300 2.3]()
![HPD INTERCOOLER KIT TO SUIT NAVARA NP300 2.3]()
HPD INTERCOOLER KIT TO SUIT NAVARA NP300 2.3
-
1-4 DAYS DELIVERY
-
100% ORIGINAL AND QUALITY
-
24 MONTHS GUARANTEE
High Performance Diesel are proud to introduce our new front mount intercooler upgrade for the D23 NP300 Navara twin turbo.
After testing the factory intercooler setup on the NP300 it became quickly evident that the intercooler was under rated for the performance of the YS23DDTT motor.
We set out to build a non invasive, direct fit intercooler with a HUGE capacity and no cutting or drilling.
What we developed has resulted in a direct bolt on kit with no irreversible modifications at all needed.
HPD has developed a charge pipe adaptor with a dual seal to eliminate any leaking issues that have become a hallmark of the factory intercooler system.
The factory Nissan intercooler core size is 540x155x80mm, giving a surface area of 840cm², and a volume of 6700cc.
Our upgrade intercooler measures 600x300x76mm, giving a massively improved surface area of 1800cm², and a simply HUGE volume of 13680cc.
That's an increase of over 200% in surface area cooling and charge air cooling volume!
NOTE: If your car is equipped with Forward Emergency Braking radar system, this may need to be relocated in order to install the intercooler kit. Please check compatibility with your vehicle.
THERE IS KNOWN FITMENT/CLEARANCE ISSUES TO SERIES 5 WARRIOR WITH IRONMAN BULLBAR
Hot pipe:
HPD also offer an optional replacement Hot pipe which eliminates the factory pipe commonly found to leak oil back on top of the turbocharger. We have designed a twin sealing coupling that outperforms OE and also eliminates the factory baffles. Hotpipe includes retaining clip.
*Please note - HPD Hot Pipe is not compatible with stock intercooler & piping*
Kit features:
Bar & Plate Core 600x300x76mm
Alloy mandrel bent piping
Billet charge pipe adaptor
Quality silicone hoses and load rated German made clamps
Laser cut mounting brackets
Hot side piping 57mmø
Cold side piping 57mmø
No cutting of radiator support for piping
HPD 4WD intercooler kits are designed to give amazing performance, reliability, consistent and sustainable power. By reducing inlet temperatures you will also reduce engine running temperatures.
The comprehensive kit has been manufactured with careful research and development. Each kit is vehicle specific with a heat exchanger, alloy mandrel bent piping, quality silicone hoses and fittings.
Our Intercooler Kits are easy to install with basic workshop tools and backed by the HPD team who can help you at any step of the way. With our dealer network Australia wide, you guys that don’t like to get your hands dirty can have your kit installed by a qualified technician. Our front mounted intercoolers don’t suffer from heat soak from high under bonnet temperatures like top mounted intercoolers or water to air intercoolers which at low speed - hard slogging can increase inlet temperatures.
HPD intercooler kits suit all the leading aftermarket turbo kits that don’t have an option for intercooling, allowing you to increase the performance, reliability and fuel efficiency of your 4WD.
High Performance Diesel are proud to introduce our new front mount intercooler upgrade for the D23 NP300 Navara twin turbo.
After testing the factory intercooler setup on the NP300 it became quickly evident that the intercooler was under rated for the performance of the YS23DDTT motor.
We set out to build a non invasive, direct fit intercooler with a HUGE capacity and no cutting or drilling.
What we developed has resulted in a direct bolt on kit with no irreversible modifications at all needed.
HPD has developed a charge pipe adaptor with a dual seal to eliminate any leaking issues that have become a hallmark of the factory intercooler system.
The factory Nissan intercooler core size is 540x155x80mm, giving a surface area of 840cm², and a volume of 6700cc.
Our upgrade intercooler measures 600x300x76mm, giving a massively improved surface area of 1800cm², and a simply HUGE volume of 13680cc.
That's an increase of over 200% in surface area cooling and charge air cooling volume!
NOTE: If your car is equipped with Forward Emergency Braking radar system, this may need to be relocated in order to install the intercooler kit. Please check compatibility with your vehicle.
THERE IS KNOWN FITMENT/CLEARANCE ISSUES TO SERIES 5 WARRIOR WITH IRONMAN BULLBAR
Hot pipe:
HPD also offer an optional replacement Hot pipe which eliminates the factory pipe commonly found to leak oil back on top of the turbocharger. We have designed a twin sealing coupling that outperforms OE and also eliminates the factory baffles. Hotpipe includes retaining clip.
*Please note - HPD Hot Pipe is not compatible with stock intercooler & piping*
Kit features:
Bar & Plate Core 600x300x76mm
Alloy mandrel bent piping
Billet charge pipe adaptor
Quality silicone hoses and load rated German made clamps
Laser cut mounting brackets
Hot side piping 57mmø
Cold side piping 57mmø
No cutting of radiator support for piping
HPD 4WD intercooler kits are designed to give amazing performance, reliability, consistent and sustainable power. By reducing inlet temperatures you will also reduce engine running temperatures.
The comprehensive kit has been manufactured with careful research and development. Each kit is vehicle specific with a heat exchanger, alloy mandrel bent piping, quality silicone hoses and fittings.
Our Intercooler Kits are easy to install with basic workshop tools and backed by the HPD team who can help you at any step of the way. With our dealer network Australia wide, you guys that don’t like to get your hands dirty can have your kit installed by a qualified technician. Our front mounted intercoolers don’t suffer from heat soak from high under bonnet temperatures like top mounted intercoolers or water to air intercoolers which at low speed - hard slogging can increase inlet temperatures.
HPD intercooler kits suit all the leading aftermarket turbo kits that don’t have an option for intercooling, allowing you to increase the performance, reliability and fuel efficiency of your 4WD.
The Diesel Doctor Australia is unable to provide an estimated time of delivery. If you will be unavailable to sign for the delivery at your home address, we recommend nominating a work or other suitable address where a member will be present during deliver hours (Approx. 8:30am-5:00pm). In the instance someone is unavailable to sign for your delivery, our carriers will leave a card and you will be required to contact our carrier directly to make alternative delivery arrangements.
Tracking information will be updated once the parcel is sent. If you have any enquiries regarding tracking information, please contact us via phone (03) 9041 2770 or email at thedieseldr@outlook.com.
Please inspect your parcel and its contents carefully on delivery. If you find any item missing or damaged, please contact us and we will provide immediate assistance.
The Current delivery window for normal sized parcels is 3 to 7 Business Days. However, postage delays may occur during the busy seasons. Postage charges may apply on various items that are oversized or for delivery outside the following metropolitan areas in all states of Australia.
If express delivery is required, please contact us.
We are happy to exchange any product purchased Online as long as the product is returned in its original condition (unopened and unmarked packaging), and is accompanied by proof of purchase in the form of a tax invoice/receipt and/or packing slip. Delivery charges are not refundable for incorrect choice, and products are to be returned to the store at the customer's own cost.
In order to process your exchange of goods, please be sure to include a note or email correspondence explaining the reason for the return, the item you wish to exchange it with, as well as your daytime contact telephone number so that our Customer Service Team are able to contact you to arrange delivery of the exchanged item (postage charges apply). We will replace any item that has arrived Damaged or is Missing from your order at no cost to you, any faults or missing items must be reported to us via eBay within 48 hours of your package being signed for.
