JLM Cavity Wax Amber Spray 500mL (Anti Corrosion coating)
JLM Cavity Wax Amber Spray 500mL (Anti Corrosion coating)
JLM
Weight: 0.08 kg
Low viscosity with excellent penetration and creep.
Non-aggressive towards plastic trim and paint.
Advanced protection against corrosion.
JLM's J04800 cavity wax offers insider protection against corrosion, which starts from within a panel but becomes obvious only when it has worked its way through to the other side. By then, the damage is likely to be extensive.
JLM Lubricants' cavity wax is ideal to safeguard inner sill cavities, separate chassis box sections and even behind outer body panel skins. Its handy aerosol can format avoids the need for dedicated and often messy compressed-air powered applicators, making it perfect for occasional use, or when a fast and convenient localised application is preferred. The brown wax is thin enough to creep into tight seams, while displacing water as it probes deeper into the panel. Once settled, it forms a tough, flexible skin that protects the steel against future water intrusion, including moisture contaminated by highly corrosive road salt. It can be used to either top-up the manufacturer's factory rustproofing, or provide superior anti-corrosion protection for a coveted vehicle.
Formulated to meet the Finnish SFS 4086 corrosion protection standard, JLM Lubricants' cavity wax even provides optimum protection to vehicles enduring the harshest weather conditions of Northern Scandinavia. Yet, it does not harm paint, or plastic/rubber trim.
HOW TO USE
JLM Lubricants chose the generously filled aerosol format for ease of use. As it is intended to be applied at room temperature, pre-warming is unnecessary. Shake the can well for at least two minutes before application. If the aerosol was used earlier, ensure that the nozzle is clear from previously-applied wax. Ensure that the treated surfaces are clean and dry for maximum protection. Any pre-existing rust should be treated with a suitable converter and any welding work must be completed before application.
Despite the nozzle's wide and even spray pattern, an effective mist is also created for optimum coverage. Therefore, JLM Lubricants recommends that the user wears gloves, a breathing mask and suitable eye protection and works in a well-ventilated area. In difficult to reach parts, the supplied extension probe (60cm) provides superior access. Do not apply cavity wax to parts that can become very hot, such as the exhaust, engine, or the braking system. Once finished, allow any mist to dissipate. Surplus wax residues can be cleaned afterwards with a suitable aromatic solvent, such as white spirit.
![JLM Cavity Wax Amber Spray 500mL (Anti Corrosion coating)]()
![JLM Cavity Wax Amber Spray 500mL (Anti Corrosion coating)]()
![JLM Cavity Wax Amber Spray 500mL (Anti Corrosion coating)]()
JLM Cavity Wax Amber Spray 500mL (Anti Corrosion coating)
-
1-4 DAYS DELIVERY
-
100% ORIGINAL AND QUALITY
-
24 MONTHS GUARANTEE
- Low viscosity with excellent penetration and creep.
- Non-aggressive towards plastic trim and paint.
- Advanced protection against corrosion.
JLM's J04800 cavity wax offers insider protection against corrosion, which starts from within a panel but becomes obvious only when it has worked its way through to the other side. By then, the damage is likely to be extensive.
JLM Lubricants' cavity wax is ideal to safeguard inner sill cavities, separate chassis box sections and even behind outer body panel skins. Its handy aerosol can format avoids the need for dedicated and often messy compressed-air powered applicators, making it perfect for occasional use, or when a fast and convenient localised application is preferred. The brown wax is thin enough to creep into tight seams, while displacing water as it probes deeper into the panel. Once settled, it forms a tough, flexible skin that protects the steel against future water intrusion, including moisture contaminated by highly corrosive road salt. It can be used to either top-up the manufacturer's factory rustproofing, or provide superior anti-corrosion protection for a coveted vehicle.
Formulated to meet the Finnish SFS 4086 corrosion protection standard, JLM Lubricants' cavity wax even provides optimum protection to vehicles enduring the harshest weather conditions of Northern Scandinavia. Yet, it does not harm paint, or plastic/rubber trim.
HOW TO USE
JLM Lubricants chose the generously filled aerosol format for ease of use. As it is intended to be applied at room temperature, pre-warming is unnecessary. Shake the can well for at least two minutes before application. If the aerosol was used earlier, ensure that the nozzle is clear from previously-applied wax. Ensure that the treated surfaces are clean and dry for maximum protection. Any pre-existing rust should be treated with a suitable converter and any welding work must be completed before application.
Despite the nozzle's wide and even spray pattern, an effective mist is also created for optimum coverage. Therefore, JLM Lubricants recommends that the user wears gloves, a breathing mask and suitable eye protection and works in a well-ventilated area. In difficult to reach parts, the supplied extension probe (60cm) provides superior access. Do not apply cavity wax to parts that can become very hot, such as the exhaust, engine, or the braking system. Once finished, allow any mist to dissipate. Surplus wax residues can be cleaned afterwards with a suitable aromatic solvent, such as white spirit.
- Low viscosity with excellent penetration and creep.
- Non-aggressive towards plastic trim and paint.
- Advanced protection against corrosion.
JLM's J04800 cavity wax offers insider protection against corrosion, which starts from within a panel but becomes obvious only when it has worked its way through to the other side. By then, the damage is likely to be extensive.
JLM Lubricants' cavity wax is ideal to safeguard inner sill cavities, separate chassis box sections and even behind outer body panel skins. Its handy aerosol can format avoids the need for dedicated and often messy compressed-air powered applicators, making it perfect for occasional use, or when a fast and convenient localised application is preferred. The brown wax is thin enough to creep into tight seams, while displacing water as it probes deeper into the panel. Once settled, it forms a tough, flexible skin that protects the steel against future water intrusion, including moisture contaminated by highly corrosive road salt. It can be used to either top-up the manufacturer's factory rustproofing, or provide superior anti-corrosion protection for a coveted vehicle.
Formulated to meet the Finnish SFS 4086 corrosion protection standard, JLM Lubricants' cavity wax even provides optimum protection to vehicles enduring the harshest weather conditions of Northern Scandinavia. Yet, it does not harm paint, or plastic/rubber trim.
HOW TO USE
JLM Lubricants chose the generously filled aerosol format for ease of use. As it is intended to be applied at room temperature, pre-warming is unnecessary. Shake the can well for at least two minutes before application. If the aerosol was used earlier, ensure that the nozzle is clear from previously-applied wax. Ensure that the treated surfaces are clean and dry for maximum protection. Any pre-existing rust should be treated with a suitable converter and any welding work must be completed before application.
Despite the nozzle's wide and even spray pattern, an effective mist is also created for optimum coverage. Therefore, JLM Lubricants recommends that the user wears gloves, a breathing mask and suitable eye protection and works in a well-ventilated area. In difficult to reach parts, the supplied extension probe (60cm) provides superior access. Do not apply cavity wax to parts that can become very hot, such as the exhaust, engine, or the braking system. Once finished, allow any mist to dissipate. Surplus wax residues can be cleaned afterwards with a suitable aromatic solvent, such as white spirit.
The Diesel Doctor Australia is unable to provide an estimated time of delivery. If you will be unavailable to sign for the delivery at your home address, we recommend nominating a work or other suitable address where a member will be present during deliver hours (Approx. 8:30am-5:00pm). In the instance someone is unavailable to sign for your delivery, our carriers will leave a card and you will be required to contact our carrier directly to make alternative delivery arrangements.
Tracking information will be updated once the parcel is sent. If you have any enquiries regarding tracking information, please contact us via phone (03) 9041 2770 or email at thedieseldr@outlook.com.
Please inspect your parcel and its contents carefully on delivery. If you find any item missing or damaged, please contact us and we will provide immediate assistance.
The Current delivery window for normal sized parcels is 3 to 7 Business Days. However, postage delays may occur during the busy seasons. Postage charges may apply on various items that are oversized or for delivery outside the following metropolitan areas in all states of Australia.
If express delivery is required, please contact us.
We are happy to exchange any product purchased Online as long as the product is returned in its original condition (unopened and unmarked packaging), and is accompanied by proof of purchase in the form of a tax invoice/receipt and/or packing slip. Delivery charges are not refundable for incorrect choice, and products are to be returned to the store at the customer's own cost.
In order to process your exchange of goods, please be sure to include a note or email correspondence explaining the reason for the return, the item you wish to exchange it with, as well as your daytime contact telephone number so that our Customer Service Team are able to contact you to arrange delivery of the exchanged item (postage charges apply). We will replace any item that has arrived Damaged or is Missing from your order at no cost to you, any faults or missing items must be reported to us via eBay within 48 hours of your package being signed for.
