AFE POWER BladeRunner GT Series Intercooler / Pipes Hot/Cold suits Chevrolet Silverado/ GMC Sierra 2500/3500 2017-2019

NOTE: This is on a 1-6 week PRE-ORDER basis, please contact us before purchase for a more accurate time frame.

This BladeRunner intercooler tube kit delivers more flow and is more robust to handle higher horsepower and boost than the factory intercooler tubes on the 2017-2019 GM L5P diesel. TIG-welded and designed from aircraft-grade, mandrel bent aluminum tubing, the BladeRunner I/C tube kit features factory mounting locations, quality hardware and 5-ply silicone couplings  for a secure, hassle free installation.

Flow and Performance:
Constructed from 3" and 3 1/2" aluminum tubing, both I/C tubes are mandrel bent and powder coated for maximum flow and performance. Smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT's. The BladeRunner I/C tube kit transfers hot air smoothly to the intercooler to accelerate heat transfer then cooled air to the engine to help make more power.

Perfect Fit:
Factory mounting locations, quality stainless steel spring-loaded T-Bolt clamps and heavy-duty 5-ply polyester reinforced silicone couplings ensure a secure install. The cold side tube includes a factory-style quick connect with an O-ring seal for a quick and simple install. 1/8" NPT ports are provided on each tube for connecting auxiliary sensors and retains the factory air temp sensor for a hassle-free installation.

Custom Appearance:
Finished in wrinkle-black powder coating and badged with a unique aluminum laser-cut aFe Power logo welded on for a custom look.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

This BladeRunner GT Series Intercooler with tubes represents the next generation of intercoolers by utilizing a 2-5/8in bar and plate core design and larger tubes to outflow stock by 10%.

End Tanks:
The unique BladeRunner end tanks are constructed out of 3/16in TIG-Welded aluminum plates.

2-5/8in Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the stock tube and fin design.

Billet Aluminum Inlet/Outlet:
This BladeRunner Intercooler uses billet aluminum inlet and outlet for superior strength and durability.

Tig-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability.

Flow and Performance:
aFe Power's BladeRunner intercooler tubes are constructed from 3in hot side and 3-1/2in cold side mandrel-bent aluminum tubing for maximum flow. The high-temp wrinkle-black powder-coat insulates the tubes from engine heat and protects them from corrosion. Smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT's.

Auxiliary Ports:
This intercooler features four (4) 1/8in NPT ports on the back side of the intercooler for sensors or water methanol injection and two (2) 1/8in NPT ports on the bottom for draining condensation or oil build up. In addition, one (1) 1/8in NPT port is provided on each tube.

Perfect Fit:
Factory mounting locations, quality stainless steel spring-loaded T-Bolt clamps and heavy-duty 5-ply polyester reinforced silicone couplings ensure a secure install. The cold side tube includes a factory-style quick connect with an O-ring seal for a quick and simple install and retains the factory air temp sensor for a hassle-free installation.

Custom Appearance:
The intercooler tubes are badged with an aluminum laser-cut aFe Power logo.

The Diesel Doctor Australia is unable to provide an estimated time of delivery. If you will be unavailable to sign for the delivery at your home address, we recommend nominating a work or other suitable address where a member will be present during deliver hours (Approx. 8:30am-5:00pm). In the instance someone is unavailable to sign for your delivery, our carriers will leave a card and you will be required to contact our carrier directly to make alternative delivery arrangements. 

Tracking information will be updated once the parcel is sent. If you have any enquiries regarding tracking information, please contact us via phone (03) 9041 2770 or email at thedieseldr@outlook.com. 

Please inspect your parcel and its contents carefully on delivery. If you find any item missing or damaged, please contact us and we will provide immediate assistance. 

The Current delivery window for normal sized parcels is 3 to 7 Business Days. However, postage delays may occur during the busy seasons. Postage charges may apply on various items that are oversized or for delivery outside the following metropolitan areas in all states of Australia. 

If express delivery is required, please contact us.

We are happy to exchange any product purchased Online as long as the product is returned in its original condition (unopened and unmarked packaging), and is accompanied by proof of purchase in the form of a tax invoice/receipt and/or packing slip. Delivery charges are not refundable for incorrect choice, and products are to be returned to the store at the customer's own cost.

In order to process your exchange of goods, please be sure to include a note or email correspondence explaining the reason for the return, the item you wish to exchange it with, as well as your daytime contact telephone number so that our Customer Service Team are able to contact you to arrange delivery of the exchanged item (postage charges apply). We will replace any item that has arrived Damaged or is Missing from your order at no cost to you, any faults or missing items must be reported to us via eBay within 48 hours of your package being signed for.