JLM Lubricants Oil & Coolant Stop Leak Kit

As they age, oil seals lose their flexibility, which affects their sealing properties. This process worsens on engines that have suffered from neglected oil changes, or endured low-quality (or incorrect specification) lubricant that contained insufficient oil seal preservative additives. JLM's Engine Oil Stop Leak contains the latest in seal-swell additive technology that helps restore their pliability, which also compensates for a degree of wear on the seal lip surface.

JLM Lubricants' Engine Oil Stop Leak also supports the lubrication system of an older engine, by enhancing oil viscosity slightly. Additional benefits include the potential to improve both oil pressure and cylinder compressions, along with the possibility to reduce the quantity of lubricant burnt within the combustion chambers, thus reducing oil consumption further. For cars that suffer from excessive oil consumption but exhibit no external leaks, JLM's Stop Smoke offers a more targeted solution.

For these reasons, JLM's Engine Oil Stop Leak is beneficial for older, higher mileage engines. It does not offer a solution for oil seals that have collapsed, or have suffered from mechanical damage, such as a puncture.

HOW TO USE

Engine Oil Stop Leak fits JLM Lubricants' company policy of offering cost-effective but advanced chemical solutions that are straightforward to use.

While it can be added to the oil at any point, JLM recommends dosing at service time. An oil-flush additive should be added to the sump, for which JLM Lubricants recommends its Engine Oil Flush, before the old oil is drained and the fresh lubricant added.

Substitute 250ml of the new oil with JLM Lubricants' Engine Oil Stop Leak. 250ml JLM Engine Oil Stop Leak treats 3 to 6 litre of motor oil. Never overfill the sump, which risks causing additional problems, such as pressurising the crankcase that risks increasing oil leaks.

As its seal-swell ingredients are so effective, it should not be used in other hydraulic systems, such as automatic gearboxes, Dual Clutch Transmissions (DCT), or power steering systems. It swells all rubber components within those systems indiscriminately, affecting the intended operation and may even enhance wear. JLM's Engine Oil Stop Leak is strictly for the lubrication systems of combustion engines, only.

Radiator Stop Leak seals holes up to 0.9 millimetres in radiators, coolant hoses, coolant reservoirs, heating radiators, cylinder heads, head gaskets and water pumps and cleans and prevents oxidation.

Benefits:

• Suitable for all types of radiators, water pumps and heating systems
• Can be mixed with all types of coolants and antifreeze
• Highly suitable as a preventive cleaner and sealant
• Protects cooling and heating systems against oxidation and blockage

As soon as Radiator Stop Leak is added to the vehicle's cooling system, its active components seal any leaks that exist up to a diameter of almost one millimetre. The cleaning effect of Radiator Stop Leak makes is ideally suited to preventing problems in the cooling system.

Radiator Stop Leakis suitable for all common cooling systems, water pumps and heating systems in all vehicles. Radiator Stop Leak has an anti-corrosive effect making it suitable for use as a preventative or for maintenance. Radiator Sealer & Conditioner Pro can be mixed with all types of ex works and after-market coolants and antifreeze.