JLM BluBoost 250mL Anti Cristallisant
JLM BluBoost 250mL Anti Cristallisant
JLM
JLM’s BluBoost J02835 additive cleans and prevents crystal formation in the AdBlue dosing system. It also conditions the AdBlue® fluid for a longer time to ensure proper working of the AdBlue® and Selective Catalytic Reduction (SCR) system. This unique chemical makeup helps prevent performance loss in the short term while reducing your chances of expensive repairs in the long-run. It also reduces foaming at low temperatures.
Compared to other leading products in the industry, JLM’s BluBoost 250ml creates fewer biuret, triuret and cyanuric acid deposits in critical areas of the fuel system, with a lower rate of AdBlue® crystallisation at lower temperatures. The JLM BluBoost allows the use of cheap standard urea without any of the problems that face its competitors: namely no clean-up effect, conformity to EN-norm surface tension and no foaming problems. Look after your system with the best today.
ABOUT ADBLUE®AdBlue® is a fluid which is automatically sprayed into a car’s exhaust system (Selective Catalytic Reduction – SCR) to reduce the nitrous oxide emissions of diesel engines. AdBlue® is made of a mixture of urea and deionized water. The widespread usage of AdBlue® in modern diesel cars coincided with stricter Euro 6 emissions standards that have been in effect since 2016. AdBlue® makes it much easier to lower the emissions of diesel cars, so they comply with theseregulations.
AdBlue® is usually checked and topped up if necessary, during a normal service, but it’s a goodidea to check it and top it up between these intervals. Almost all cars that use AdBlue® are fittedwith a gauge on the dashboard to warn you if you’re running low.
USAGE DIRECTIONS
Because it is unlikely you will know the exact amount of existing AdBlue® in the reservoir of your car, we recommend premixing the JLM BluBoost additive with the AdBlue® top up fluid BEFORE pouring it into your car’s AdBlue® reservoir.
Check the table on the JLM BluBoost bottle to see how many milliliters of BluBoost to add.
Squeeze the bottle to fill the dosing chamber with the corresponding volume. It is important NOT TO OVERDOSE as this will have a negative effect on the good working of the AdBlue® fluid.
Empty the contents of the dosing chamber into the container with the AdBlue®.
Pour the premixed fluid into the AdBlue® container of your car.
SPECIFICATIONSVolume: 250mLPart. Nop: JLM-J02385Destiny g/cm3 : 1 (20 °C)Colour: BlueOdour: Characteristic
![JLM BluBoost 250mL Anti Cristallisant]()
![JLM BluBoost 250mL Anti Cristallisant]()
![JLM BluBoost 250mL Anti Cristallisant]()
JLM BluBoost 250mL Anti Cristallisant
-
1-4 DAYS DELIVERY
-
100% ORIGINAL AND QUALITY
-
24 MONTHS GUARANTEE
JLM’s BluBoost J02835 additive cleans and prevents crystal formation in the AdBlue dosing system. It also conditions the AdBlue® fluid for a longer time to ensure proper working of the AdBlue® and Selective Catalytic Reduction (SCR) system. This unique chemical makeup helps prevent performance loss in the short term while reducing your chances of expensive repairs in the long-run. It also reduces foaming at low temperatures.
Compared to other leading products in the industry, JLM’s BluBoost 250ml creates fewer biuret, triuret and cyanuric acid deposits in critical areas of the fuel system, with a lower rate of AdBlue® crystallisation at lower temperatures. The JLM BluBoost allows the use of cheap standard urea without any of the problems that face its competitors: namely no clean-up effect, conformity to EN-norm surface tension and no foaming problems. Look after your system with the best today.
ABOUT ADBLUE®
AdBlue® is a fluid which is automatically sprayed into a car’s exhaust system (Selective Catalytic Reduction – SCR) to reduce the nitrous oxide emissions of diesel engines. AdBlue® is made of a mixture of urea and deionized water. The widespread usage of AdBlue® in modern diesel cars coincided with stricter Euro 6 emissions standards that have been in effect since 2016. AdBlue® makes it much easier to lower the emissions of diesel cars, so they comply with theseregulations.
AdBlue® is usually checked and topped up if necessary, during a normal service, but it’s a goodidea to check it and top it up between these intervals. Almost all cars that use AdBlue® are fittedwith a gauge on the dashboard to warn you if you’re running low.
USAGE DIRECTIONS
- Because it is unlikely you will know the exact amount of existing AdBlue® in the reservoir of your car, we recommend premixing the JLM BluBoost additive with the AdBlue® top up fluid BEFORE pouring it into your car’s AdBlue® reservoir.
- Check the table on the JLM BluBoost bottle to see how many milliliters of BluBoost to add.
- Squeeze the bottle to fill the dosing chamber with the corresponding volume. It is important NOT TO OVERDOSE as this will have a negative effect on the good working of the AdBlue® fluid.
- Empty the contents of the dosing chamber into the container with the AdBlue®.
- Pour the premixed fluid into the AdBlue® container of your car.
SPECIFICATIONS
Volume: 250mL
Part. Nop: JLM-J02385
Destiny g/cm3 : 1 (20 °C)
Colour: Blue
Odour: Characteristic
JLM’s BluBoost J02835 additive cleans and prevents crystal formation in the AdBlue dosing system. It also conditions the AdBlue® fluid for a longer time to ensure proper working of the AdBlue® and Selective Catalytic Reduction (SCR) system. This unique chemical makeup helps prevent performance loss in the short term while reducing your chances of expensive repairs in the long-run. It also reduces foaming at low temperatures.
Compared to other leading products in the industry, JLM’s BluBoost 250ml creates fewer biuret, triuret and cyanuric acid deposits in critical areas of the fuel system, with a lower rate of AdBlue® crystallisation at lower temperatures. The JLM BluBoost allows the use of cheap standard urea without any of the problems that face its competitors: namely no clean-up effect, conformity to EN-norm surface tension and no foaming problems. Look after your system with the best today.
ABOUT ADBLUE®
AdBlue® is a fluid which is automatically sprayed into a car’s exhaust system (Selective Catalytic Reduction – SCR) to reduce the nitrous oxide emissions of diesel engines. AdBlue® is made of a mixture of urea and deionized water. The widespread usage of AdBlue® in modern diesel cars coincided with stricter Euro 6 emissions standards that have been in effect since 2016. AdBlue® makes it much easier to lower the emissions of diesel cars, so they comply with theseregulations.
AdBlue® is usually checked and topped up if necessary, during a normal service, but it’s a goodidea to check it and top it up between these intervals. Almost all cars that use AdBlue® are fittedwith a gauge on the dashboard to warn you if you’re running low.
USAGE DIRECTIONS
- Because it is unlikely you will know the exact amount of existing AdBlue® in the reservoir of your car, we recommend premixing the JLM BluBoost additive with the AdBlue® top up fluid BEFORE pouring it into your car’s AdBlue® reservoir.
- Check the table on the JLM BluBoost bottle to see how many milliliters of BluBoost to add.
- Squeeze the bottle to fill the dosing chamber with the corresponding volume. It is important NOT TO OVERDOSE as this will have a negative effect on the good working of the AdBlue® fluid.
- Empty the contents of the dosing chamber into the container with the AdBlue®.
- Pour the premixed fluid into the AdBlue® container of your car.
SPECIFICATIONS
Volume: 250mL
Part. Nop: JLM-J02385
Destiny g/cm3 : 1 (20 °C)
Colour: Blue
Odour: Characteristic
The Diesel Doctor Australia is unable to provide an estimated time of delivery. If you will be unavailable to sign for the delivery at your home address, we recommend nominating a work or other suitable address where a member will be present during deliver hours (Approx. 8:30am-5:00pm). In the instance someone is unavailable to sign for your delivery, our carriers will leave a card and you will be required to contact our carrier directly to make alternative delivery arrangements.
Tracking information will be updated once the parcel is sent. If you have any enquiries regarding tracking information, please contact us via phone (03) 9041 2770 or email at thedieseldr@outlook.com.
Please inspect your parcel and its contents carefully on delivery. If you find any item missing or damaged, please contact us and we will provide immediate assistance.
The Current delivery window for normal sized parcels is 3 to 7 Business Days. However, postage delays may occur during the busy seasons. Postage charges may apply on various items that are oversized or for delivery outside the following metropolitan areas in all states of Australia.
If express delivery is required, please contact us.
We are happy to exchange any product purchased Online as long as the product is returned in its original condition (unopened and unmarked packaging), and is accompanied by proof of purchase in the form of a tax invoice/receipt and/or packing slip. Delivery charges are not refundable for incorrect choice, and products are to be returned to the store at the customer's own cost.
In order to process your exchange of goods, please be sure to include a note or email correspondence explaining the reason for the return, the item you wish to exchange it with, as well as your daytime contact telephone number so that our Customer Service Team are able to contact you to arrange delivery of the exchanged item (postage charges apply). We will replace any item that has arrived Damaged or is Missing from your order at no cost to you, any faults or missing items must be reported to us via eBay within 48 hours of your package being signed for.
