JLM BluBoost 250mL Anti Cristallisant

JLM’s BluBoost J02835 additive cleans and prevents crystal formation in the AdBlue dosing system. It also conditions the AdBlue® fluid for a longer time to ensure proper working of the AdBlue® and Selective Catalytic Reduction (SCR) system. This unique chemical makeup helps prevent performance loss in the short term while reducing your chances of expensive repairs in the long-run. It also reduces foaming at low temperatures.

Compared to other leading products in the industry, JLM’s BluBoost 250ml creates fewer biuret, triuret and cyanuric acid deposits in critical areas of the fuel system, with a lower rate of AdBlue® crystallisation at lower temperatures. The JLM BluBoost allows the use of cheap standard urea without any of the problems that face its competitors: namely no clean-up effect, conformity to EN-norm surface tension and no foaming problems. Look after your system with the best today.

ABOUT ADBLUE®
AdBlue® is a fluid which is automatically sprayed into a car’s exhaust system (Selective Catalytic Reduction – SCR) to reduce the nitrous oxide emissions of diesel engines. AdBlue® is made of a mixture of urea and deionized water. The widespread usage of AdBlue® in modern diesel cars coincided with stricter Euro 6 emissions standards that have been in effect since 2016. AdBlue® makes it much easier to lower the emissions of diesel cars, so they comply with theseregulations.

AdBlue® is usually checked and topped up if necessary, during a normal service, but it’s a goodidea to check it and top it up between these intervals. Almost all cars that use AdBlue® are fittedwith a gauge on the dashboard to warn you if you’re running low.

USAGE DIRECTIONS

• Because it is unlikely you will know the exact amount of existing AdBlue® in the reservoir of your car, we recommend premixing the JLM BluBoost additive with the AdBlue® top up fluid BEFORE pouring it into your car’s AdBlue® reservoir.
• Check the table on the JLM BluBoost bottle to see how many milliliters of BluBoost to add.
• Squeeze the bottle to fill the dosing chamber with the corresponding volume. It is important NOT TO OVERDOSE as this will have a negative effect on the good working of the AdBlue® fluid.
• Empty the contents of the dosing chamber into the container with the AdBlue®.
• Pour the premixed fluid into the AdBlue® container of your car.

SPECIFICATIONS
Volume: 250mL
Part. Nop: JLM-J02385
Destiny g/cm3 : 1 (20 °C)
Colour: Blue
Odour: Characteristic