FRONT RUNNER - Slimline II Roof Rail Rack Kit FOR A Ford Ranger T6 Wildtrak (2014-2022) FRONT RUNNER - Slimline II Roof Rail Rack Kit FOR A Ford Ranger T6 Wildtrak (2014-2022) front runner This 1156mm/45.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your Ford Ranger T6 Wildtrak. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required.Configure your Slimline II Rack to suit any adventure by adding the RACK ACCESSORIES or explore them later when a new adventure calls. This 1156mm/45.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your Ford Ranger T6 Wildtrak. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use.   KRFR004T - Ford Ranger T6 Wildtrak (2014-2022) Slimline II Roof Rail Rack Kit - by Front RunnerConsisting of:2x GOFR001 - Rail Foot Base (Pair)2x GORR053 - Raised Rail Outer Grips / No. 42x GORR073 - Raised Rail Inner Grips / D1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTA06 - SLII Tray - 1165mm(W)X1156mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm

FRONT RUNNER - Slimline II Roof Rail Rack Kit FOR A Ford Ranger T6 Wildtrak (2014-2022)

Code: KRFR004TBP
Sale
$1,505.00 $1,450.00
In Stock
Add to Wishlist Add to Compare
  • 1-4 DAYS DELIVERY

  • 100% ORIGINAL AND QUALITY

  • 24 MONTHS GUARANTEE

This 1156mm/45.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your Ford Ranger T6 Wildtrak. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required.

Configure your Slimline II Rack to suit any adventure by adding the RACK ACCESSORIES or explore them later when a new adventure calls.

This 1156mm/45.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your Ford Ranger T6 Wildtrak. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.

This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.

For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted.

Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits.

For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack.

Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.

Please contact us for advice on specific mounting solutions for your vehicle and use.

 

KRFR004T - Ford Ranger T6 Wildtrak (2014-2022) Slimline II Roof Rail Rack Kit - by Front Runner




Consisting of:


2x GOFR001 - Rail Foot Base (Pair)
2x GORR053 - Raised Rail Outer Grips / No. 4
2x GORR073 - Raised Rail Inner Grips / D
1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
1x RRSTA06 - SLII Tray - 1165mm(W)X1156mm(L)
1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm

This 1156mm/45.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your Ford Ranger T6 Wildtrak. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required.

Configure your Slimline II Rack to suit any adventure by adding the RACK ACCESSORIES or explore them later when a new adventure calls.

This 1156mm/45.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your Ford Ranger T6 Wildtrak. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.

This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.

For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted.

Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits.

For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack.

Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.

Please contact us for advice on specific mounting solutions for your vehicle and use.

 

KRFR004T - Ford Ranger T6 Wildtrak (2014-2022) Slimline II Roof Rail Rack Kit - by Front Runner




Consisting of:


2x GOFR001 - Rail Foot Base (Pair)
2x GORR053 - Raised Rail Outer Grips / No. 4
2x GORR073 - Raised Rail Inner Grips / D
1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
1x RRSTA06 - SLII Tray - 1165mm(W)X1156mm(L)
1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm

The Diesel Doctor Australia is unable to provide an estimated time of delivery. If you will be unavailable to sign for the delivery at your home address, we recommend nominating a work or other suitable address where a member will be present during deliver hours (Approx. 8:30am-5:00pm). In the instance someone is unavailable to sign for your delivery, our carriers will leave a card and you will be required to contact our carrier directly to make alternative delivery arrangements. 

Tracking information will be updated once the parcel is sent. If you have any enquiries regarding tracking information, please contact us via phone (03) 9041 2770 or email at thedieseldr@outlook.com

Please inspect your parcel and its contents carefully on delivery. If you find any item missing or damaged, please contact us and we will provide immediate assistance. 

The Current delivery window for normal sized parcels is 3 to 7 Business Days. However, postage delays may occur during the busy seasons. Postage charges may apply on various items that are oversized or for delivery outside the following metropolitan areas in all states of Australia. 

If express delivery is required, please contact us.

We are happy to exchange any product purchased Online as long as the product is returned in its original condition (unopened and unmarked packaging), and is accompanied by proof of purchase in the form of a tax invoice/receipt and/or packing slip. Delivery charges are not refundable for incorrect choice, and products are to be returned to the store at the customer's own cost.

In order to process your exchange of goods, please be sure to include a note or email correspondence explaining the reason for the return, the item you wish to exchange it with, as well as your daytime contact telephone number so that our Customer Service Team are able to contact you to arrange delivery of the exchanged item (postage charges apply). We will replace any item that has arrived Damaged or is Missing from your order at no cost to you, any faults or missing items must be reported to us via eBay within 48 hours of your package being signed for.